
Photo: Unsplash
Search for bulk ashwagandha extract and you will see three numbers again and again: 1.5%, 2.5% and 5% withanolides. It is tempting to assume 5% is simply better. In practice, the grade only makes sense together with the test method, the dose you plan to use and the market you sell in.
In short: withanolide percentages compare extracts only when they are measured the same way. A 5% extract by a gravimetric method can contain fewer specific withanolides than a 2.5% extract by HPLC. Choose the grade by dose and method, not by the biggest number.
Key takeaways
- Withanolides are the steroidal lactones used to measure ashwagandha extract quality.
- HPLC measures specific withanolide compounds; gravimetric methods weigh a broader fraction and usually give higher numbers.
- Higher grades allow smaller doses, but cost more and are more processed.
- Some markets set limits or warnings for withaferin A, so ask for it on the COA if you need it.
What withanolides are
Withanolides are naturally occurring steroidal lactones found in Withania somnifera. Examples include withanolide A, withanoside IV and withaferin A. Their content varies with the plant part, growing conditions and extraction, which is why extracts are standardised to a withanolide percentage.
The common grades
| Grade | Typical use | Notes |
|---|---|---|
| 1.5% withanolides | Capsules, powders, traditional-style products | Closer to whole-root profile; larger dose |
| 2.5% withanolides | Mainstream supplements | Balance of concentration and cost |
| 5% and above | Smaller doses, premium and combination formulas | More processing; higher cost per kilo |
| Ratio extracts (e.g. 10:1) | Traditional formulations | No withanolide figure unless also tested |
HPLC vs gravimetric
This is the point most buyers miss. HPLC separates and measures specific withanolide compounds against reference standards. Gravimetric methods extract a fraction with solvents and weigh it, which can include other compounds. Published patent data on ashwagandha shows the two approaches can give very different numbers for related fractions of the same material.
- Always ask which method was used, and which markers HPLC measured.
- Compare quotes only within the same method.
- Write the method into the specification, so every batch is tested the same way.
For more on standardisation, see extract ratio vs standardised extract.
Not sure which grade fits your formula? Tell us your dose and we'll suggest one.
Get a RecommendationDose maths
To deliver the same amount of withanolides, a lower-grade extract needs a larger dose. For example, 15 mg of withanolides comes from about 1,000 mg of a 1.5% extract, 600 mg of a 2.5% extract or 300 mg of a 5% extract (all by the same method). That affects capsule size, number of capsules a day and cost per serving. Many clinical studies used root extracts in the range of several hundred milligrams a day, so check what your target market and formula need.
Withaferin A and market rules
Withaferin A is one withanolide that some regulators watch more closely. Some markets have introduced warnings or restrictions on ashwagandha, and buyers increasingly ask for withaferin A content on the COA, or for low-withaferin grades. If you sell in Europe, check the current national position before choosing a grade.
How to choose a grade
- Start from the dose you want per serving and the capsule count you can accept.
- Fix the method (HPLC is more specific) and compare suppliers on that basis.
- Check root-only identity and the full COA.
- Consider your market's rules on ashwagandha and withaferin A.
Our ashwagandha supplier checklist covers the rest of the buying process.
A withanolide percentage is only half a specification. The other half is the method that measured it.
Ashwagandha Grades and Formats
Ashwagandha extract in several standardisations, plus powder and capsules, with a certificate of analysis for every batch.
Ashwagandha extract from Arizone
Arizone International LLP supplies root-only ashwagandha extract standardised to 1.5% to 5% withanolides and above, with the method (HPLC or gravimetric) stated on every COA. Low withaferin A grades can be specified on request.
Sources: USPTO: process to enhance the bioactivity of ashwagandha extracts (patent data on HPLC and gravimetric results); Ingredients Network: ashwagandha extract standardisation.
Withanolide Grade Questions
It is more concentrated, so you need less per dose, but it is only comparable if both are measured by the same method.
HPLC measures specific withanolide compounds; gravimetric methods weigh a broader fraction and usually show higher figures.
1.5% to 2.5% grades are the most common for mainstream capsules and powders.
About 1,000 mg at 1.5%, 600 mg at 2.5% or 300 mg at 5%, measured by the same method.
One of the withanolides in ashwagandha. Some buyers and markets ask for it to be stated or kept low.
Yes, for most markets. Traditional use and most research focus on the root.
